推荐用途
牌号
Grade		 化学成分(%)
Chemical Composition 		硬度
Hardness
HRA±0.3		 密度
Density
g/cm±0.1		 抗弯强度
TRS
n/mm		 晶粒度
Grain Size
m		 推荐用途
Applications recommended
Wc Co 其它Compostion
TF15 89.5 10 0.5 92.0 14.40 4300 0.7 推荐用于制作各种规格微型钻钻头立铁刀旋转锉刀等
适用于钢材铸铁不锈钢和耐热合金钢材的切削加工
适用镍基合金钛合金切削加工
For making microdrills,drills,endrnills,and burrs etc
For manchining of steels,castion,stainlessand heat-resistant steels
For manchining of nickel-based and titanium alloys
TF25 87.2 12 0.8 92.5 14.10 4500 0.5 推荐用于制作各种规格立铣刀用于高速切削加工
用于加工淬火钢模具钢淬火不锈钢铁镍基合金和钛合金铸铁玻璃纤维增强复合材料等
For making endmills,This material is especially suited for high speed milling,For making of hardende steels, hardened stain less steels,nickel-based alloys,titanlum alloys,cast iron,and fiberglass reinforced plastics,etc.
TF06 93.5 6 0.5 93.2 14.80 3500 0.6 推荐用于制作0.8-3.2mm加工PCB的钻头和铣刀
适用于玻璃纤维增强复合材料和树脂结合陶瓷材料的洗削和钻削加工
适用于木头纸和有色金属的切削加工
For making 0.8-3.2mm drills and routers of printed Clrcuit Boards.
For drilling milling and routing GRP composites and ceamic filed resin materials.
For machining of wood,paper and nou-ferrous allays.
TF06A 93 6 1.0 94.5 14.65 3700 0.5 推荐用于制作0.8-3.2mm加工PCB的钻头和铣刀
推荐用于制作其它规格型钻钻头立铣刀旋转锉刀等
For making 0.8-3.2mm drills and routers of printed Circuit Borards.
For making other microdrills,endmills,and burrs etc.
TF08 91 8 1.0 93.5 14.50 3800 0.5 推荐用于制作各种立铣刀用于高不速切削加工
用于加工淬火钢模具钢淬火不锈钢镍基合金和钛合金玻璃纤维增强复合材料等
For making endrnills
This materlal is especially sulled for high speed milling.
For making of hardened steels, hardened stainless steels,nickel-based alloys,titanium alloys,cost iron,and fiberglass reinforced plastics,etc.
TF25A 87.7 11.5 0.8 92.3 14.20 4100 0.6 推荐用于制作各种微型钻钻头立铣刀旋转锉刀等
适用开钢材铸铁不锈钢和耐热合金钢材的切削加工
适用镍基合金钛合金切削加工
For making microdrills,drills,endrnills,and burrs etc
For manchining of steels,castiron,stainlessand heat-resistant steels
For manchining of nickel-based and titaniu alloys.
ZF30 84 15 1.0 90 13.9 4600 0.7 推荐用于制作长板材用于状型刨刀和切断刀
Recommended for production of sheet metal used for longtype Paodao knife and cut off
ZF35 81 18 1.0 89 13.6 4800 0.7 推荐用于制作长板材用于状型刨刀和切断刀
Recommended for production of sheet metal used for longtype Paodao knife and cut off